Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser for CAN buses. It is discrete It does not include LED indicators or key fobs and is hidden in the wiring of your vehicle.
It also permits the user to disable the system temporarily through Transport Mode in the event of renting out their vehicle. This guide will walk you through the process of installing an Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a modern security device that guards your vehicle against hacking, key cloning and relay attacks. The system is connected directly to the ECU of your car and protected by a PIN code that you choose. It's inaccessible to thieves using scanners for diagnostics or other modern methods, and it is unable to be disabled by cutting circuits.
The system is easy to use, but it's essential to use a an expert installation to ensure a clean and secure connection to your vehicle's ECU. Installers approved by Thatcham can assist you with the installation and programming of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's security package.
To avoid an accidental deployment of short circuits or airbags The installer must first remove your battery. After that the installer is able to safely begin work. Basic hand tools can be used for precise connections. A multimeter is useful to test electrical values. Insulation tape and cable tie are crucial to ensure connections are secure and keep wiring neat. The Ghost Immobiliser user's guide will give specific instructions that are specifically tailored to your specific model.
During the installation process, it's important to choose an area for grounding that is free of any paint or debris. The installer should ensure that the immobiliser's H and CAN L wires are connected to the appropriate ports on your vehicle's ECU. These wires can be connected or soldered, depending on the model. Using a quality connector is recommended to ensure a durable and reliable connection.
Transport Mode can be activated by the customer once the installation is completed. This allows the vehicle to be used by valet parking or mechanics without needing to know the pin code. The customer must press the service icon on the dashboard five times over two seconds. Once this is done the system will verify by displaying 5 signals.
The Autowatch Ghost 2 immobiliser is TASSA certified and is an extremely efficient immobiliser. It's a great choice for those who rent out their vehicles frequently on platforms like Turo. Having an immobiliser can also lower insurance costs, as it significantly decreases the risk of theft.
Getting Started
You can't go far wrong with an autowatch ignition device in order to guard your vehicle from theft. It prevents your car from starting even if someone steals or copies your key. This is due to its sophisticated technology that is designed to prevent the engine from running until the correct PIN code is entered.
The device connects to the vehicle's bus network CAN and allows direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence that only you can understand. This makes it impossible for anyone else to start your vehicle. This is the most secure way to protect your pride and joy. It will not lose its value should you ever decide to sell it.
Installing a ghost immobiliser can be an easy procedure, but it is crucial to follow the directions carefully to avoid electrical issues and system malfunctions. You must first locate a 12V power supply and a suitable grounding for the chassis of your car. Then, you can begin connecting the wires for the immobiliser. Make use of high-quality connectors and soldering methods to create a solid connection. Connect the connections with heat shrink tubing or insulation tape, or other materials to avoid electrical short circuits.
After the wires are connected, you are able to connect the battery and begin the engine to check whether the immobiliser is functioning. When everything is functioning correctly then you can put it in a secure location beneath the dash or anywhere else in the vehicle. Make sure to hide it in a secure manner to prevent thieves from getting into it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it complies with the highest standards of security and is a great protection against car thieves. It is a superior defense against key cloning, hacking and relay attacks, and can't be disabled without knowing the code. The device is also simple to use and can be put into an auto valet mode so that your car isn't activated if you take it in for servicing or an MOT.
Wiring
The Ghost Immobiliser, a cutting modern security system, was designed to stop theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. In contrast to other aftermarket systems that require the removal of circuit components, the Ghost Immobiliser doesn't interfere with any of the factory settings for your vehicle.
The system is also unnoticeable by thieves using scanners for diagnostics. This is because the system doesn't transmit and receive radio frequency signals and it utilizes CAN data to communicate with your ECU. It also doesn't require modifications to your existing key fobs.
To utilize the Ghost Immobiliser, simply turn on your car's ignition and enter your disarm sequence (either one or two buttons). The indicator will flash twice to confirm that you've entered the correct code. After this, you can start your vehicle and leave in peace.
Once installed, Ghost Immobiliser protects your car against hacking or key cloning while also protecting its value. In Transport Mode, you can temporarily disable the Ghost Immobiliser if you have to hand your car over for service or valet parking.
To complete a Ghost Immobiliser installation, you'll have to locate a source of constant power (12V) and a grounding point. Make sure that both are properly insulated and can be touched. It's also recommended to use cable ties to tie and secure the wires, as this will decrease the chance of being tampered with by thieves. Be sure to check the exact position of these points to avoid making mistakes and mark them with the help of tape or a label. It's also a good idea to examine every connection for signs of wear and tear. Connections that are loose can cause problems with the system, so be sure they're securely in place and properly insulated. Also, don't forget test the Ghost Immobiliser after installation is completed. This will ensure that the unit is working properly and that all connections and insulation are safe. If there are any issues, be sure to resolve them immediately.
Testing
The Autowatch Ghost immobiliser is a revolutionary vehicle security system that works seamlessly with your vehicle's ECU to stop the motor from starting without authorization. Its cutting-edge technology safeguards your car from hacking, key cloning, and other methods that thieves employ to steal cars. The Ghost also works in conjunction with other alarm and tracking systems to offer the most complete protection for your vehicle. The Ghost's unparalleled features and discreet design make it a preferred choice for car enthusiasts and security-conscious drivers alike.
To ensure the proper integration of the Ghost Immobiliser, it is essential to follow every step of the installation procedure. A good starting point is to consult the vehicle's wiring diagram, which will serve as a guideline for locating and connecting the necessary wires. You'll need to determine the power and grounding sources. Once you have located them, you will have to mark them to make them easily identifiable when installing. It is essential to use top-quality materials and tools. Basic hand tools will aid in making precise connections. A multimeter will check electrical values, and also ensure safety. Insulation tape and cable tie ensure that all connections are neat. Finally, a user manual will provide specific instructions specific to your Ghost model.
Before proceeding with the installation it is essential to test the system by entering the PIN code and starting the vehicle. This test will verify that the immobiliser works as intended and will stop vehicle starts that are not authorized. This procedure should be carried out regularly as part of your routine inspections of the vehicle to ensure that the system is always working correctly.
After the installation is completed, you are now able to start driving your car with confidence. The Ghost will protect your pride and joy from would-be car thieves. autowatch ghost immobiliser will ensure that no one can escape with your car without having the correct PIN code. The Ghost can be used in conjunction with an approved Thatcham tracker, which detects attempts at theft or tampering. This lets you locate your car if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those made by all major manufacturers. Monty's Locksmith can help you secure your vehicle with this innovative device. Contact us today to find out more about our service and installation options. We are a TASSA Registered installer which guarantees that we adhere to the strictest guidelines and procedures for installing our products. This ensures customers, insurance companies, and law enforcement agencies that all installations are carried out safely and correctly.